Input

Contact IEC 1131.2 (type 1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 o 22 V) 2/3 wires Reed Photocell Max voltage: ±28 Vdc Max frequency 20 kHz min 1 pulse every 116 minutes

Outputs

N.2 threshold channels, PNP, BJT, Mosfet; Max load: 60 mA / 24 Vdc

Channels

1

Input

IEC 1131.2 free contact (type 1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 or 22 V) 2/3 wires Reed Photocell Voltage: max ±28 Vdc Frequency: Max 20 kHz, min 1 pulse each 116 minutes

Outputs

2-CH trip amplifier, PNP, BJT, Mosfet; max rating > 60 mA / 24 Vdc

Channels

1

Input

Contact IEC 1131.2 (type1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 o 22 V) 2/3 wires Reed Photocell Max frequency: 400 Hz

Outputs

PNP e NPN simultaneous channels Max current 200 mA Max voltage 30 V (continuous), 50V (pulse)

Channels

1

Input

VOLTAGE (mV, V): Bipolar from 75 mV to 20 V, CURRENT (mA): Bipolar up to 20 mA, RTD: Pt100, Pt500, Pt1000, Ni100, KTY81, KTY84, NTC; THERMOCOUPLE: Type J, K, R, S, T, E, B, N, POTENTIOMETER: 500 Ω ..100 kΩ, RHEOSTAT: 500 Ω..25 kΩ,

Outputs

CURRENT -20 – +20 mA Maxium load resistance 500Ω VOLTAGE -10 – +10 V Minimum load resistance 1 k Ω

Channels

1

Input

VOLTAGE Bipolar from 75 mV to 20 V, CURRENT Bipolar up to 20 mA, RTD , THERMOCOUPLE TC, POTENTIOMETER: 500 Ω ..100 kΩ RHEOSTAT: 500 Ω..25 kΩ STROBE: alternative to the relay output

Outputs

VOLTAGE 4 scales: 0..1, 0..5, 0..10, 2..10 V Min load resistance: 2.000 Ω CURRENT 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω RELAY Alternative to the strobe NC / NA in case of alarm

Channels

1

Input

Pt100 IEC 751 standard / EN 60751 – ITS90 Range: -150..+650 °C Min span: 50 °C Current on transmitter: 900 μA Connection: 2,3,4 wires Max cable resistance: 20 Ω

Outputs

VOLTAGE Range: 0..10 / 10..0 / 0..5 / 1..5 V Min load resistance: 2 kΩ CURRENT Range: 4..20 / 20..4 / 0..20 / 20..0 mA Max load resistance: 500 Ω Protection: 25 mA

Channels

1

Input

Pt100 IEC 751 standard / EN 60751 – ITS90 Range: -200..+160 °C Min span: 20 °C Current on transmitter: 900 μA Connection: 2,3,4 wires Max cable resistance: 20 Ω

Outputs

VOLTAGE Range: 0..10 / 10..0 / 0..5 / 1..5 V Min load resistance: 2 kΩ CURRENT Range: 4..20 / 20..4 / 0..20 / 20..0 mA Max load resistance: 500 Ω Protection: 25 mA

Channels

1

Input

Thermoresistance PT100, NI100

Outputs

CURRENT Range: 4..20 / 20..4 mA (2 wire) Load resistance: 1 kΩ Resolution: 0,5 μA (15 bit+sign) Protection: 30 mA

Channels

1

Input

Thermocouple J,K,E,N,S,R,B,T

Outputs

VOLTAGE Range: 0..10 / 10..0 / 0..5 / 1..5 V Min load resistance: 2 kΩ CURRENT Range: 4..20 / 20..4 / 0..20 / 20..0 mA Max load resistance: 500 Ω

Channels

1