Intrari

VOLTAGE (V) 4 scales: 0..1, 0..5, 0..10, 2..10 V, input impedance 500 kΩ CURRENT (mA) 2 scales: 0/4..20 mA Active connection: loop powered 20 Vdc non stabilized Passive connection: input impedance 100 Ω

Semnal de iesire

• VOLTAGE (V) 4 scales: 0..5, 0..10, 1..5, 2..10 V, min load resistance 2 kΩ • CURRENT (mA) 2 scales: 0/4..20 mA Active / passive connection (max loop impedance 600 Ω)

Nr. Canale de intrare

1

Intrari

• ANALOG Load cell (strain gauge), 4 / 6 wires connection, min 87 Ω for 1..4 load cells (350 Ω) or 1..8 load cells (1.000 Ω); Sensibility: 1..64 mV/V • DIGITAL Tare calibration

Semnal de iesire

• CURRENT (mA) 0..20, 4..20 mA • VOLTAGE (V) 0..10, 0..5 Vdc • DIGITAL Weight limit threshold

Nr. Canale de intrare

1

Intrari

VOLTAGE up to 10 V Bipolar current up to 20 mA THERMORESISTANCE: Pt100, Pt500, Pt1000, Ni100 THERMOCOUPLE type: J,K,R,S,T,B,E,N POTENTIOMETER up to 100 kΩ

Semnal de iesire

RELAYS SPST N.O. position with common Max RELAY current 3 A@ 250V; 3 A@ 30V Max RELAY voltage 250 V CAT. II

Nr. Canale de intrare

1

Intrari

Contact IEC 1131.2 (type 1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 o 22 V) 2/3 wires Reed Photocell Max voltage: ±28 Vdc Max frequency 20 kHz min 1 pulse every 116 minutes

Semnal de iesire

N.2 threshold channels, PNP, BJT, Mosfet; Max load: 60 mA / 24 Vdc

Nr. Canale de intrare

1

Intrari

IEC 1131.2 free contact (type 1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 or 22 V) 2/3 wires Reed Photocell Voltage: max ±28 Vdc Frequency: Max 20 kHz, min 1 pulse each 116 minutes

Semnal de iesire

2-CH trip amplifier, PNP, BJT, Mosfet; max rating > 60 mA / 24 Vdc

Nr. Canale de intrare

1

Intrari

Contact IEC 1131.2 (type1) Namur (DIN 19234, EN 60947-5-6) NPN / PNP (12 o 22 V) 2/3 wires Reed Photocell Max frequency: 400 Hz

Semnal de iesire

PNP e NPN simultaneous channels Max current 200 mA Max voltage 30 V (continuous), 50V (pulse)

Nr. Canale de intrare

1

Intrari

VOLTAGE (mV, V): Bipolar from 75 mV to 20 V, CURRENT (mA): Bipolar up to 20 mA, RTD: Pt100, Pt500, Pt1000, Ni100, KTY81, KTY84, NTC; THERMOCOUPLE: Type J, K, R, S, T, E, B, N, POTENTIOMETER: 500 Ω ..100 kΩ, RHEOSTAT: 500 Ω..25 kΩ,

Semnal de iesire

CURRENT -20 – +20 mA Maxium load resistance 500Ω VOLTAGE -10 – +10 V Minimum load resistance 1 k Ω

Nr. Canale de intrare

1

Intrari

• VOLTAGE (V) settable scale: 0..10 V • CURRENT (mA): settable scale: 0..20 mA (active/passive module) • POTENTIOMETER • THERMOCOUPLE: J,K,R,S,T,B,E,N • THERMORESISTANCE: Pt100, Pt500, Pt1000, Ni100

Semnal de iesire

• VOLTAGE (V) settable scale: 0..10 V • CURRENT (mA) settable scale: 0..20 mA (active/passive) Resoltuion 14 bit

Nr. Canale de intrare

1

Intrari

Pt100 IEC 751 standard / EN 60751 – ITS90 Range: -150..+650 °C Min span: 50 °C Current on transmitter: 900 μA Connection: 2,3,4 wires Max cable resistance: 20 Ω

Semnal de iesire

VOLTAGE Range: 0..10 / 10..0 / 0..5 / 1..5 V Min load resistance: 2 kΩ CURRENT Range: 4..20 / 20..4 / 0..20 / 20..0 mA Max load resistance: 500 Ω Protection: 25 mA

Nr. Canale de intrare

1