Intrari

• CURRENT (mA) 4..20 mA

Semnal de iesire

• CURRENT (mA) 4..20 mA

Nr. Canale de intrare

1

Intrari

VOLTAGE (V) 4 scales: 0..1, 0..5, 0..10, 2..10 V, input impedance 500 kΩ CURRENT (mA) 2 scales: 0/4..20 mA Active connection: loop powered 20 Vdc non stabilized Passive connection: input impedance 100 Ω

Semnal de iesire

• VOLTAGE (V) 4 scales: 0..5, 0..10, 1..5, 2..10 V, min load resistance 2 kΩ • CURRENT (mA) 2 scales: 0/4..20 mA Active / passive connection (max loop impedance 600 Ω)

Nr. Canale de intrare

1

Intrari

• ANALOG Load cell (strain gauge), 4 / 6 wires connection, min 87 Ω for 1..4 load cells (350 Ω) or 1..8 load cells (1.000 Ω); Sensibility: 1..64 mV/V • DIGITAL Tare calibration

Semnal de iesire

• CURRENT (mA) 0..20, 4..20 mA • VOLTAGE (V) 0..10, 0..5 Vdc • DIGITAL Weight limit threshold

Nr. Canale de intrare

1

Intrari

AC VOLTAGE 0..500 Vac Input impedance: 2000 Ω /V Frequency: 10 Hz..1 kHz

Semnal de iesire

CURRENT Active or passive: 0..20 mA or 4..20 mA Maximum load resistance 600 Ohm VOLTAGE 0..5 V, 1..5 V, 0..10 V, 2..10 V Minimum load resistance: 2500 Ohm

Nr. Canale de intrare

1

Intrari

VOLTAGE (mV, V): Bipolar from 75 mV to 20 V, CURRENT (mA): Bipolar up to 20 mA, RTD: Pt100, Pt500, Pt1000, Ni100, KTY81, KTY84, NTC; THERMOCOUPLE TC, POTENTIOMETER: 500 Ω ..100 kΩ, RHEOSTAT: 500 Ω..25 kΩ

Semnal de iesire

VOLTAGE 4 scales: 0..1, 0..5, 0..10, 2..10 V Min load resistance: 2.000 Ω CURRENT 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω RELAY Alternative to the strobe NC / NA in case of alarm

Nr. Canale de intrare

1

Intrari

VOLTAGE (mV, V): Bipolar from 75 mV to 20 V, CURRENT (mA): Bipolar up to 20 mA, RTD: Pt100, Pt500, Pt1000, Ni100, KTY81, KTY84, NTC; THERMOCOUPLE: Type J, K, R, S, T, E, B, N, POTENTIOMETER: 500 Ω ..100 kΩ, RHEOSTAT: 500 Ω..25 kΩ,

Semnal de iesire

CURRENT -20 – +20 mA Maxium load resistance 500Ω VOLTAGE -10 – +10 V Minimum load resistance 1 k Ω

Nr. Canale de intrare

1

Intrari

VOLTAGE Bipolar from 75 mV to 20 V, CURRENT Bipolar up to 20 mA, RTD , THERMOCOUPLE TC, POTENTIOMETER: 500 Ω ..100 kΩ RHEOSTAT: 500 Ω..25 kΩ STROBE: alternative to the relay output

Semnal de iesire

VOLTAGE 4 scales: 0..1, 0..5, 0..10, 2..10 V Min load resistance: 2.000 Ω CURRENT 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω RELAY Alternative to the strobe NC / NA in case of alarm

Nr. Canale de intrare

1

Intrari

Type J, K, R, S, T, B, E, N; resolution 2.5 μV, automatic TC burn out detection, input impedance > 5MΩ

Semnal de iesire

VOLTAGE: 0..5 V / 0..10 V / 1..5 V / 2..10 V, min load resistance 2 kΩ Resolution: 2.5 μA/ 1.25mV. CURRENT :0..20 / 4..20 mA, max load resistance 600 Ω

Nr. Canale de intrare

1

Intrari

RTD PT100, PT500,PT1000, NI100 2, 3 or 4 wires measurement, energising current 1 mA,resolution 0.1 °C

Semnal de iesire

VOLTAGE: 0..5 V / 0..10 V / 1..5 V / 2..10 V, min load resistance 2 kΩ Resolution: 2.5 μA/ 1.25mV. CURRENT: 0..20 / 4..20 mA, max

Nr. Canale de intrare

1